24-hour hotline：
0532-86621279
Your Current Location ：Home
» PRODUCTS
» Condenser rubber ball cleaning device
» Rubber ball cleaning device
» Rubber ball cleaning device
Name：Rubber ball cleaning device
Details
Rubber ball cleaning device
Working principle of rubber ball cleaning system: suitable sponge rubber ball is adopted. The diameter of wet state of the ball is 1 ~ 2mm larger than that of cooling tube, and the proportion of wet state is 1.00 ~ 1.15g/cm3. The ball from the loading chamber on hand hole into the system, the ball is a rubber ball pump into the cooling water inlet pipe, the ball into the condenser water chamber, with the water diffusion after the rubber ball evenly distributed into the cooling pipe, and squeezed through, will adhere to the tube wall of dirt away, into the water, the net on the condenser outlet section of the ball in the water recycling by the rubber ball pump out and into the ball room, so again and again. According to the length of the route, it takes 20 ~ 40 seconds for each rubber ball to complete a circular cleaning. After the cleaning device runs for 30 ~ 60 minutes, each rubber ball can be cleaned 45 ~ 90/90 ~ 180 cooling pipes. Therefore, as long as 10% of the total number of pipes is put into the ball, the total number of pipes can be cleaned more than 10 times.
Ball cleaning system includes: ball net, secondary filter, ball room, ball pump, sponge ball, valve, control cabinet, etc.
Working principle of rubber ball cleaning system: suitable sponge rubber ball is adopted. The diameter of wet state of the ball is 1 ~ 2mm larger than that of cooling tube, and the proportion of wet state is 1.00 ~ 1.15g/cm3. The ball from the loading chamber on hand hole into the system, the ball is a rubber ball pump into the cooling water inlet pipe, the ball into the condenser water chamber, with the water diffusion after the rubber ball evenly distributed into the cooling pipe, and squeezed through, will adhere to the tube wall of dirt away, into the water, the net on the condenser outlet section of the ball in the water recycling by the rubber ball pump out and into the ball room, so again and again. According to the length of the route, it takes 20 ~ 40 seconds for each rubber ball to complete a circular cleaning. After the cleaning device runs for 30 ~ 60 minutes, each rubber ball can be cleaned 45 ~ 90/90 ~ 180 cooling pipes. Therefore, as long as 10% of the total number of pipes is put into the ball, the total number of pipes can be cleaned more than 10 times.
Ball cleaning system includes: ball net, secondary filter, ball room, ball pump, sponge ball, valve, control cabinet, etc.
Copyright ©2017 Qingdao huatai power equipment co. LTD Technical support：Leixun online No. 1 huatai road, jiaozhou city, Qingdao